Giriş

This guide will show you how to remove the charging port and power connector from the Nokia 3560.

Parçalar

Hiçbir parçaya gerek yok.

  1. Press down on the release latch on the bottom of the cover.
    • Press down on the release latch on the bottom of the cover.

    • Once the latch is released, lift the cover from the phone.

  2. Lift the front case off of the phone body.
    • Lift the front case off of the phone body.

    • Lift the keypad off of the phone.

    • The screen is held to the body by six screws.

    • Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).

    • Insert a flat screwdriver between the black body and plastic layer.

    • Pry the layers apart. The LCD and plastic layer will lift out as one piece.

    • With the screws removed, the logic board can then be lifted out of the body by hand.

    • These two parts can be removed with your fingers.

    • Make sure not to bend the metal contacts.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sam Ryan

Üyelik tarihi: 18-04-2010

1 İtibar

8 adet Kılavuz yazıldı

Takım

Cal Poly, Team 30-39, Garner Spring 2010 Cal Poly, Team 30-39, Garner Spring 2010 üyesi

CPSU-GARNER-S10S30G39

5 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 3,121