Ana içeriğe geç

Giriş

Remove the front cover to access the lens mount, manual and autofocus switch, lens release switch, timer light, and other components.

Parçalar

Hiçbir parça belirtilmedi.

  1. Retrieve your Pentax K200D, the lens mount cover, and required tools.
    • Retrieve your Pentax K200D, the lens mount cover, and required tools.

    • Remove the lens, if you have one attached, and replace it with the lens mount cover to make handling and repair easier.

  2. With the camera turned on, press the pop-up flash button to release the flash.
    • With the camera turned on, press the pop-up flash button to release the flash.

    • Be sure to turn the camera back off before proceeding.

    • Remove the two 4.3 mm Phillips screws securing the top edge of the front cover to the top cover.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Remove the seven 4.3 mm Phillips screws securing the bottom cover to the camera body
    • Remove the seven 4.3 mm Phillips screws securing the bottom cover to the camera body

    • Remove the two 2.5 mm Phillips screws also securing the bottom cover to the camera body

    • Open the battery door and carefully remove the bottom cover, as the battery door components become unsecured when the bottom cover is removed.

  5. Remove the two 4.3 mm Phillips screws securing the right side of the front cover to the camera body.
    • Remove the two 4.3 mm Phillips screws securing the right side of the front cover to the camera body.

Sonuç

To reassemble your device, follow these instructions in reverse order.

7 farklı kişi bu kılavuzu tamamladı.

Rick Nelson

Üyelik tarihi: 05-06-2010

652 İtibar

1 Kılavuz yazıldı

Takım

Master Techs Master Techs üyesi

Community

286 Üyeler

808 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 4

Son 30 Gün: 37

Her zaman: 4,137