Eşyalarını Tamir Et Topluluk Mağaza

Disassembling Pentax Optio S4i Lens Assembly

Giriş

This guide will show you how to remove the main camera lens assembly from the camera's frame.

Neye ihtiyacın var

  1. Disassembling Pentax Optio S4i Lens Assembly, Front and Back Cover: adım 1, 2 resimden 1. Disassembling Pentax Optio S4i Lens Assembly, Front and Back Cover: adım 1, 2 resimden 2.

    • Remove the following screws:

    • Two silver 3.15mm Phillips #00 screws on the right side of the camera

    • Two silver 2.08mm Phillips #00 screws on the left side of the camera

    Düzenle

  2. Disassembling Pentax Optio S4i Lens Assembly: adım 2, 1 resimden 1.

    • Remove the two indicated screws on the bottom of the camera:

    • The screw circled in red is a longer silver 3.15mm Phillips #00 screw

    • The screw circled in blue is a shorter silver 2.25mm Phillips #00 screw

    Düzenle

  3. Disassembling Pentax Optio S4i Lens Assembly: adım 3, 2 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 3, 2 resimden 2.

    • Carefully pull the back of casing away from the front.

    Düzenle

  4. Disassembling Pentax Optio S4i Lens Assembly: adım 4, 3 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 4, 3 resimden 2. Disassembling Pentax Optio S4i Lens Assembly: adım 4, 3 resimden 3.

    • After removing the back cover, several things must be removed.

    • Silver donut-shaped button will fall off. Place separately. Remove the plug covers on the right side of camera, labeled “PC/AV” and “DC IN 4.5V”.

    Düzenle

  5. Disassembling Pentax Optio S4i Lens Assembly: adım 5, 2 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 5, 2 resimden 2.

    • To remove the front cover, gently hold the inside structure of the camera and slowly pull the front cover off.

    Düzenle

  6. Disassembling Pentax Optio S4i Lens Assembly, LCD: adım 6, 2 resimden 1. Disassembling Pentax Optio S4i Lens Assembly, LCD: adım 6, 2 resimden 2.

    • On the front of the camera, in battery case, remove screws indicated:

    • Two black 2.05mm Phillips #00 screws

    Düzenle

  7. Disassembling Pentax Optio S4i Lens Assembly: adım 7, 2 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 7, 2 resimden 2.

    • Flip the camera over to the backside and remove screws indicated:

    • The screw circled in red is a longer black 3.00mm Phillips #00 screw

    • The screw circled in red is a shorter black 2.00mm Phillips #00 screw

    Düzenle

  8. Disassembling Pentax Optio S4i Lens Assembly: adım 8, 1 resimden 1.

    • Pull the cover plate off for the two power cord jacks.

    Düzenle

  9. Disassembling Pentax Optio S4i Lens Assembly: adım 9, 3 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 9, 3 resimden 2. Disassembling Pentax Optio S4i Lens Assembly: adım 9, 3 resimden 3.

    • Cautiously and gently pull up the control board at the upper left corner, next to the viewfinder.

    Düzenle

  10. Disassembling Pentax Optio S4i Lens Assembly: adım 10, 1 resimden 1.

    • Remove the orange tape on top of the SD cardholder.

    Düzenle

  12. Disassembling Pentax Optio S4i Lens Assembly: adım 11, 3 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 11, 3 resimden 2. Disassembling Pentax Optio S4i Lens Assembly: adım 11, 3 resimden 3.

    • Open the battery cover and lift plastic piece off.

    Düzenle

  13. Disassembling Pentax Optio S4i Lens Assembly: adım 12, 1 resimden 1.

    • Remove tape on left side of camera.

    Düzenle

  14. Disassembling Pentax Optio S4i Lens Assembly: adım 13, 1 resimden 1.

    • Remove the indicated 2.40mm Phillips #00 screw to release top left LCD bracket.

    Düzenle

  15. Disassembling Pentax Optio S4i Lens Assembly: adım 14, 1 resimden 1.

    • Remove top left LCD bracket.

    • This is a small piece, be careful not to lose it.

    Düzenle

  16. Disassembling Pentax Optio S4i Lens Assembly: adım 15, 2 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 15, 2 resimden 2.

    • Push down bottom left LCD bracket to release the LCD from grip.

    Düzenle

  17. Disassembling Pentax Optio S4i Lens Assembly: adım 16, 1 resimden 1.

    • Gently lift up LCD screen.

    Düzenle

  18. Disassembling Pentax Optio S4i Lens Assembly: adım 17, 3 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 17, 3 resimden 2. Disassembling Pentax Optio S4i Lens Assembly: adım 17, 3 resimden 3.

    • Slowly pull LCD screen to the left to remove it from the other grips.

    • BEWARE: The LCD screen is attached to the logic board by two wires at the bottom.

    Düzenle

  19. Disassembling Pentax Optio S4i Lens Assembly, Lens Assembly: adım 18, 3 resimden 1. Disassembling Pentax Optio S4i Lens Assembly, Lens Assembly: adım 18, 3 resimden 2. Disassembling Pentax Optio S4i Lens Assembly, Lens Assembly: adım 18, 3 resimden 3.

    • Lift up tape slightly on both sides of speaker.

    Düzenle

  20. Disassembling Pentax Optio S4i Lens Assembly: adım 19, 3 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 19, 3 resimden 2. Disassembling Pentax Optio S4i Lens Assembly: adım 19, 3 resimden 3.

    • Use the pointed end of a spudger to lift up brackets.

    • Lift speaker cover out.

    Düzenle

  21. Disassembling Pentax Optio S4i Lens Assembly: adım 20, 1 resimden 1.

    • Remove speaker cover.

    Düzenle

  22. Disassembling Pentax Optio S4i Lens Assembly: adım 21, 2 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 21, 2 resimden 2.

    • Turn camera to front.

    • Carefully peel off orange wire tape. The tape is glued to the surface indicated.

    • Lift speaker from holder.

    Düzenle

  23. Disassembling Pentax Optio S4i Lens Assembly: adım 22, 2 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 22, 2 resimden 2.

    • Use a wedge to lift up the wire tape flap.

    Düzenle

  24. Disassembling Pentax Optio S4i Lens Assembly: adım 23, 3 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 23, 3 resimden 2. Disassembling Pentax Optio S4i Lens Assembly: adım 23, 3 resimden 3.

    • Insert the point of a spudger underneath the wire shown.

    Düzenle

  25. Disassembling Pentax Optio S4i Lens Assembly: adım 24, 2 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 24, 2 resimden 2.

    • Carefully lift the wire out of the crevasses.

    Düzenle

  26. Disassembling Pentax Optio S4i Lens Assembly: adım 25, 1 resimden 1.

    • Slowly bend the speaker's wire tape away from the lens assembly. Avoid creasing the tape.

    Düzenle

  27. Disassembling Pentax Optio S4i Lens Assembly: adım 26, 3 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 26, 3 resimden 2. Disassembling Pentax Optio S4i Lens Assembly: adım 26, 3 resimden 3.

    • Remove indicated screws:

    • Three Black 3.80mm Phillips #00 screws.

    Düzenle

  28. Disassembling Pentax Optio S4i Lens Assembly: adım 27, 2 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 27, 2 resimden 2.

    • Remove the indicated black 3.40mm Phillips #00 screw on the bottom of the camera.

    • Remove copper leads.

    Düzenle

  29. Disassembling Pentax Optio S4i Lens Assembly: adım 28, 3 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 28, 3 resimden 2. Disassembling Pentax Optio S4i Lens Assembly: adım 28, 3 resimden 3.

    • Unscrew the indicated 3.80mm Phillips #00 screw on the back of the camera.

    • Remove screw and bracket.

    Düzenle

  30. Disassembling Pentax Optio S4i Lens Assembly: adım 29, 1 resimden 1.

    • Turn the camera over to the front.

    • In the following step, you will undo the indicated pegs. PROCEED TO THE NEXT STEP.

    Düzenle

  31. Disassembling Pentax Optio S4i Lens Assembly: adım 30, 3 resimden 1. Disassembling Pentax Optio S4i Lens Assembly: adım 30, 3 resimden 2. Disassembling Pentax Optio S4i Lens Assembly: adım 30, 3 resimden 3.

    • Carefully holding the camera, grab the corresponding two points.

    • Carefully twist the lens assembly away from you. You will be turning your hand clockwise.

    • Pull lens assembly out.

    • The lens assembly is attached to the logic board by wire tape.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Bassem Tossoun

Üyelik tarihi: 01/21/11

201 İtibar

2 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

Cal Poly, Team 4-29, Regan Winter 2011 Cal Poly, Team 4-29, Regan Winter 2011 üyesi

CPSU-REGAN-W11S4G29

3 Üyeler

10 adet Kılavuz yazıldı

2 Yorum

Do you have this disassembly steps for the S12?

ThoH - Yanıt

Lens will Not focuscorrectly

ThoH - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 8

Her zaman: 2,196