Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Disassembling RCA CC310 Left Cover

Neye ihtiyacın var

  1. Disassembling RCA CC310 Left Cover, Left Cover: adım 1, 2 resimden 1. Disassembling RCA CC310 Left Cover, Left Cover: adım 1, 2 resimden 2.
    • Remove the 6-7.9mm ph#0 screws on the back and bottom.

    • Remove the one 3.8mm ph#0 screw on the bottom.

    • Remove the two 7.5mm ph#0 screws on the back and bottom.

  2. Disassembling RCA CC310 Left Cover: adım 2, 2 resimden 1. Disassembling RCA CC310 Left Cover: adım 2, 2 resimden 2.
    • Remove 5.8mm ph#1 screw from the side button panel.

    • Slide the viewfinder all the way to the right and remove the 7.9mm ph#0 screw.

  3. Disassembling RCA CC310 Left Cover: adım 3, 2 resimden 1. Disassembling RCA CC310 Left Cover: adım 3, 2 resimden 2.
    • Pry along the seam on the top side near the buttons with a spudger.

  4. Disassembling RCA CC310 Left Cover: adım 4, 2 resimden 1. Disassembling RCA CC310 Left Cover: adım 4, 2 resimden 2.
    • Pull the left panel away from the rest of the camcorder.

    • Unplug the red speaker cable located at the rear of the device.

    • Be careful to not pull too hard. The speaker cable is still connected to the panel and it can rip.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Ekip

Cal Poly, Team 5-20, Amido Winter 2011 Cal Poly, Team 5-20, Amido Winter 2011 üyesi

CPSU-AMIDO-W11S5G20

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 9

Her zaman: 915