Ana içeriğe geç

Disassembling SKIL 4235 Jigsaw Base plate

Neye ihtiyacın var

  1. Disassembling SKIL 4235 Jigsaw Base plate, Disassembling SKIL 4235 Jigsaw Base plate: adım 1, 3 resimden 1. Disassembling SKIL 4235 Jigsaw Base plate, Disassembling SKIL 4235 Jigsaw Base plate: adım 1, 3 resimden 2. Disassembling SKIL 4235 Jigsaw Base plate, Disassembling SKIL 4235 Jigsaw Base plate: adım 1, 3 resimden 3.
    • Orient your saw so that the blade is pointing in the opposite direction of your body. Ensure that the screws circled are visible and pointing skyward. This will be the standard position of the Jigsaw for the duration of this guide.

  2. Disassembling SKIL 4235 Jigsaw Base plate: adım 2, 1 resimden 1.
    • Using two hands grip both side of the saw and lay on side.

  3. Disassembling SKIL 4235 Jigsaw Base plate: adım 3, 1 resimden 1.
    • With bottom of the base plate visible, identify one M4 screw circled in red and remove with Phillips screwdriver (some models have flathead screw, as pictured, and require flathead screwdriver).

  4. Disassembling SKIL 4235 Jigsaw Base plate: adım 4, 1 resimden 1.
    • After removing M4 screw, remove the base plate and place to the side. Don't forget to replace the M4 screw near the base plate during re-installation.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Adam Cardoso

Üyelik tarihi: 11/12/13

357 İtibar

3 adet Kılavuz yazıldı

Ekip

UMass Dartmouth, Team 4-8, Vijaybhaskar Fall 2013 UMass Dartmouth, Team 4-8, Vijaybhaskar Fall 2013 üyesi

UMASSD-VIJAYBHASKAR-F13S4G8

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 7

Son 30 gün: 41

Her zaman: 2,949