Ana içeriğe geç

Disassembling Samsung Galaxy S Blaze Whole Device

Neye ihtiyacın var

  1. Disassembling Samsung Galaxy S Blaze Whole Device, Disassembling Samsung Galaxy S Blaze Whole Device: adım 1, 1 resimden 1.
    • Remove the back plate.

  2. Disassembling Samsung Galaxy S Blaze Whole Device: adım 2, 1 resimden 1.
    • Remove the battery from the device.

  3. Disassembling Samsung Galaxy S Blaze Whole Device: adım 3, 2 resimden 1. Disassembling Samsung Galaxy S Blaze Whole Device: adım 3, 2 resimden 2.
    • Use a Phillips head screwdriver size 00.

    • Remove the 4mm screws from the frame.

    • The eight screws are all the same size.

  4. Disassembling Samsung Galaxy S Blaze Whole Device: adım 4, 1 resimden 1.
    • Remove the frame from the phone by using the blue plastic opening tool.

    • Work around the phone with the tool until the frame is off.

    • You may need to use a bit of force to pry off the frame.

  5. Disassembling Samsung Galaxy S Blaze Whole Device: adım 5, 1 resimden 1.
    • The volume rocker is attached to the frame by two plastic prongs.

    • Unhook the prongs from the frame and remove the volume rocker.

  6. Disassembling Samsung Galaxy S Blaze Whole Device: adım 6, 1 resimden 1.
    • The SD card slot is held in place by a small tab.

    • Unhook the tab of the SD card slot from the frame of the phone.

  7. Disassembling Samsung Galaxy S Blaze Whole Device: adım 7, 1 resimden 1.
    • The power button is attached to the phone with two prongs.

    • Unhook the prongs of the power button from the frame of the phone.

  8. Disassembling Samsung Galaxy S Blaze Whole Device: adım 8, 3 resimden 1. Disassembling Samsung Galaxy S Blaze Whole Device: adım 8, 3 resimden 2. Disassembling Samsung Galaxy S Blaze Whole Device: adım 8, 3 resimden 3.
    • 4 ribbon cable connectors hold the motherboard to the phone.

    • The first 3 are all on one side.

    • Use the blue plastic opening tool to unlatch the wire ribbons from the motherboard.

  9. Disassembling Samsung Galaxy S Blaze Whole Device: adım 9, 1 resimden 1.
    • Flip the motherboard over to access the last ribbon cable connector.

    • Unlatch the final ribbon cable connector from the phone.

    • Remove the motherboard from the phone.

  10. Disassembling Samsung Galaxy S Blaze Whole Device: adım 10, 1 resimden 1.
    • All of the parts are seen here.

Sonuç

To reassemble your device, follow these instructions in reverse order.

If there is something wrong with your device, try this: Samsung Galaxy S Blaze 4G Troubleshooting

2 farklı kişi bu kılavuzu tamamladı.

Jake Best

Üyelik tarihi: 03/05/15

261 İtibar

2 adet Kılavuz yazıldı

Ekip

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 722