Giriş

This guide will walk you through how to disassemble the Samsung Gear 2.

Parçalar

Hiçbir parçaya gerek yok.

Before disassembling your Gear, be sure it is powered off. To remove each strap, locate the metal latches on both sides of the back of the Gear.
  • Before disassembling your Gear, be sure it is powered off.

  • To remove each strap, locate the metal latches on both sides of the back of the Gear.

  • Press down on the metal latch while pulling the strap away from the Gear until it is completely off.

Yorum Ekle

Remove the four 4.0 mm screws on the back of the Gear using a T5 Torx Screwdriver.
  • Remove the four 4.0 mm screws on the back of the Gear using a T5 Torx Screwdriver.

Yorum Ekle

Firmly holding the Gear, insert the flat side of the spudger at an angle to pry the back casing off of the device. Move the spudger along the sides of the Gear to completely detach the back and front components. Pry the device open from the other side also if it does not fully disassemble from one side. Pry the device open from the other side also if it does not fully disassemble from one side.
  • Firmly holding the Gear, insert the flat side of the spudger at an angle to pry the back casing off of the device. Move the spudger along the sides of the Gear to completely detach the back and front components.

  • Pry the device open from the other side also if it does not fully disassemble from one side.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Jonathan Molina

Üyelik tarihi: 14-04-2014

862 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 13-27, Maness Spring 2014 Cal Poly, Team 13-27, Maness Spring 2014 üyesi

CPSU-MANESS-S14S13G27

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 5

Son 30 Gün: 25

Tüm Zamanlar: 2,732