Ana içeriğe geç

Giriş

How to remove keyboard

  1. Push open the latch and remove the battery. Push open the latch and remove the battery.
    • Push open the latch and remove the battery.

  2. Twist off the antenna. Pop off the transparent cylinder.
    • Twist off the antenna.

    • Pop off the transparent cylinder.

  3. Remove the five screws as shown.
    • Remove the five screws as shown.

  4. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  5. Carefully pry the back plate off.
    • Carefully pry the back plate off.

  6. Carefully detach golden screen connector. Carefully detach golden screen connector.
    • Carefully detach golden screen connector.

  7. Pop out the logic board with spudger. Caution: Do not touch with bare hands, use tweezers or wash hands before contact.
    • Pop out the logic board with spudger.

    • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

  8. Place the logic board on a clean tray. Place the logic board on a clean tray.
    • Place the logic board on a clean tray.

  9. Peel off the keyboard.
    • Peel off the keyboard.

Sonuç

To reassemble your device, follow these instructions in reverse order.

doconnor

Üyelik tarihi: 19-04-2010

25 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 10-43, Garner Spring 2010 Cal Poly, Team 10-43, Garner Spring 2010 üyesi

CPSU-GARNER-S10S10G43

5 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,067