1. Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.
    • Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.

    Yorum Ekle

  2. Remove the screw on each side of the device using a Phillips head screwdriver.
    • Remove the screw on each side of the device using a Phillips head screwdriver.

    Yorum Ekle

    • Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.

    • Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.

    Yorum Ekle

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Using the philips screwdriver, remove the two screws on the mother board.

    Yorum Ekle

    • Place the pry tool in-between the front cover and mother board.

    • Gently separate the front cover.

    Yorum Ekle

    • After opening the front cover you will see and electric ribbon connecting the buttons to the mother board.

    Yorum Ekle

    • CAUTION: Do not rip the electric ribbon from the mother board.

    • Carefully flip up the plastic lip that holds the electric ribbon to the board.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Jason Farr

Üyelik tarihi: 21-10-2013

337 İtibar

3 adet Kılavuz yazıldı

Takım

Clemson, Team 14-8, Benson Fall 2013 Clemson, Team 14-8, Benson Fall 2013 üyesi

CLEM-BENSON-F13S14G8

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 141