Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.
  • Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.

Yorum Ekle

Remove the screw on each side of the device using a Phillips head screwdriver.
  • Remove the screw on each side of the device using a Phillips head screwdriver.

Yorum Ekle

  • Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.

  • Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.

Yorum Ekle

  • Once the back cover has been removed the battery will be visible.

  • Pry the battery from the device.

    • NOTE: The battery should still be connected to the device

Yorum Ekle

  • Unplug the battery connecting cables.

    • NOTE: The battery now should be free from all connections to the device.

Yorum Ekle

  • Once the battery has been removed you can see the motherboard.

  • Unscrew 4 screws on the metal docket using a Phillips head screw driver.

  • The USB connector can now be taken off of the device.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Dylan Peters

Üyelik tarihi: 18-10-2013

404 İtibar

4 adet Kılavuz yazıldı

Takım

Clemson, Team 14-8, Benson Fall 2013 Clemson, Team 14-8, Benson Fall 2013 üyesi

CLEM-BENSON-F13S14G8

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 4

Her zaman: 372