Giriş

The front housing includes the motor, the chuck, and the gears. There's a good chance that whatever needs to be replaced will be found in here.

Parçalar

Hiçbir parçaya gerek yok.

  1. On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.
    • On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.

    Yorum Ekle

  2. Pull the front housing apart from the rear.
    • Pull the front housing apart from the rear.

    • The motor and gears might fall out when you are pulling it apart.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Matt

Üyelik tarihi: 10-10-2010

365 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 5-17, Maness Fall 2010 Cal Poly, Team 5-17, Maness Fall 2010 üyesi

CPSU-MANESS-F10S5G17

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 84