Ana içeriğe geç

Disassembling Sony Vaio VGN-FW 590 Audio USB Board

Neye ihtiyacın var

  1. Disassembling Sony Vaio VGN-FW 590 Audio USB Board, Audio USB Board: adım 1, 1 resimden 1.
    • - Remove battery.

    • - Remove memory tray door (1 Screw).

    • - Remove hard drive door (1 Screw).

    • - Remove hard drive (3 Screws).

  2. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: adım 2, 1 resimden 1.
    • - Remove all screws from the bottom cover. There are three types of screws. Marked here with Red Circles, Red Squares and Orange Circles.

  3. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: adım 3, 1 resimden 1.
    • - Remove CD/DVD Drive by sliding it out.

    • - Remove three more screws, which were hiding under the DVD drive.

  4. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: adım 4, 1 resimden 1.
    • - Carefully remove the cover, by unpopping it with a slim flathead, slide it out away from the RJ-45, HDMI and VGA ports.

  5. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: adım 5, 1 resimden 1.
    • - The audio/usb interface card is now within reach. Just remove the two screws and carefully slide out the flat connector to remove the card.

  6. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: adım 6, 1 resimden 1.
    • - Fire up the air compressor and blow out dust from the fan and heatsinks.

  7. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: adım 7, 1 resimden 1.
    • - If you are replacing your RAM, simply unpop the four latches and slide out the memory sticks.

Sonuç

To reassemble your device, follow these instructions in reverse order.

8 farklı kişi bu kılavuzu tamamladı.

Artem Nikulkov

Üyelik tarihi: 10/22/10

313 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 20

Her zaman: 21,081