Giriş

Access to Hard Disk Drive

Pry up cover, remove screw.
  • Pry up cover, remove screw.

Yorum Ekle

Remove screws.
  • Remove screws.

Yorum Ekle

Gently pry out to unsnap top plastic housing.
  • Gently pry out to unsnap top plastic housing.

Yorum Ekle

Lift keyboard and flip over, but do not remove, it is still attached by ribbon cable.
  • Lift keyboard and flip over, but do not remove, it is still attached by ribbon cable.

  • Slide back connector tabs to release ribbon cable.

  • Remove 5 screws and lift out plate to access HDD and FDD.

Yorum Ekle

To remove HDD loosen tape, lift out BIOS battery, remove screws and slide back HDD housing.
  • To remove HDD loosen tape, lift out BIOS battery, remove screws and slide back HDD housing.

In this view, the ribbon cable connector tabs are shown in their open position.

WayneG - Yanıt

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 başka kişi bu kılavuzu tamamladı.

WayneG

Üyelik tarihi: 13-05-2013

191 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 2

Son 30 Gün: 9

Her zaman: 1,790