Onarım Topluluğuna Katılın - Hesap Oluşturun

Giriş

The VTech has two cases. The main case housing the main circuit board and other components and a smaller enclosure that houses the screen and two buttons. This guide is how to disassemble the Vtech to gain access to the screen and button components.

Neye ihtiyacın var

1. Adım 1 Case
  Remove the battery covers and the four batteries.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024
2. Adım 2
  Remove the four plastic caps with a metal spudger to expose the 6.0 mm Philips JIS #0 case screws.
  
  Remove the eight 6.0 mm JIS #0 case screws.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024
3. Adım 3
  Using a plastic opening tool, separate the two pieces of the case carefully.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024
1. Adım 4 Disassembling VTech MobiGo Touch Learning System Screen Enclosure
  Remove the three 4.0 mm Philips J0 screws holding the "L" shaped brackets in place.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024
2. Adım 5
  Remove the three "L" shaped brackets and the spring.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024
3. Adım 6
  Flip the device over and remove the three 4.0 mm Philips J0 case screws.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024
4. Adım 7
  Separate the front and back of the case.
  
  Use a plastic opening tool if necessary.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024