Ana içeriğe geç

Giriş

This guide will teach the user how to remove the back plate, which is necessary to access any of the internal components of the laptop.

Parçalar

Hiçbir parça belirtilmedi.

  1. Turn off the laptop and disconnect any charging cables.
    • Turn off the laptop and disconnect any charging cables.

    • Flip the laptop over so that the Service Tag is shown at the top left corner.

  2. Remove the highlighted screws from the back of the laptop with a Phillips #0 Screwdriver.
    • Remove the highlighted screws from the back of the laptop with a Phillips #0 Screwdriver.

  3. Remove the highlighted screws from the panels in the bottom right-hand corner of the laptop using the Phillips #0 Screwdriver.
    • Remove the highlighted screws from the panels in the bottom right-hand corner of the laptop using the Phillips #0 Screwdriver.

  4. Remove the two panels in the bottom right-hand corner by sliding in the direction of the arrows imprinted on the panels.
    • Remove the two panels in the bottom right-hand corner by sliding in the direction of the arrows imprinted on the panels.

  5. Remove the highlighted screws underneath the removed panels using the Phillips #0 Screwdriver.
    • Remove the highlighted screws underneath the removed panels using the Phillips #0 Screwdriver.

  6. Carefully remove the hard drive from the panel in the bottom right-hand corner of the laptop.
    • Carefully remove the hard drive from the panel in the bottom right-hand corner of the laptop.

  7. Locate the battery, located on the top side of the laptop to the right of the Service Tag .
    • Locate the battery, located on the top side of the laptop to the right of the Service Tag .

    • Remove the battery by pressing inwards on the tabs on either side of the battery.

  8. Remove cover in the top left side of the laptop next to the battery by pulling it outwards.
    • Remove cover in the top left side of the laptop next to the battery by pulling it outwards.

  9. Remove the backplate of the laptop by pulling it away from the laptop.
    • Remove the backplate of the laptop by pulling it away from the laptop.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

shamaz

Üyelik tarihi: 12-03-2014

125 İtibar

1 Kılavuz yazıldı

Takım

UMass Dartmouth, Team 2-6, Vijaybhaskar Spring 2014 UMass Dartmouth, Team 2-6, Vijaybhaskar Spring 2014 üyesi

UMASSD-VIJAYBHASKAR-S14S2G6

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 339