Giriş

Behold the iClicker. This learning device is used in some college classrooms to help make the learning process more interactive. Course instructors can ask multiple choice questions and students can respond by pressing the button that corresponds to the answer they desire.

Bu teardown bir tamir kılavuzu değildir. iClicker cihazınızı onarmak için, servis kılavuzumuzu kullanın.

Behold the iclicker in all its interactive and educational beauty.
  • Behold the iclicker in all its interactive and educational beauty.

Yorum Ekle

Place the device on a flat surface, buttons facing down.
  • Place the device on a flat surface, buttons facing down.

  • Remove the battery cover and the three batteries within.

Yorum Ekle

Remove the two visible screws using a #00 Phillips screwdriver. Oops! Don't forget a hidden third screw beneath the factory label.
  • Remove the two visible screws using a #00 Phillips screwdriver.

  • Oops! Don't forget a hidden third screw beneath the factory label.

  • Peel back the corner of the label to reveal the hidden screw.

  • If you wish to maintain the integrity of the label, a blowdryer may be used to soften the adhesive on the label before removal.

Yorum Ekle

Depending on how much abuse your iclicker has endured, you might be able to separate the front and rear panels of the iclicker with your fingers. For the more resistent iclickers, a spudger may be employed to separate the pieces.
  • Depending on how much abuse your iclicker has endured, you might be able to separate the front and rear panels of the iclicker with your fingers.

  • For the more resistent iclickers, a spudger may be employed to separate the pieces.

Yorum Ekle

Your iclicker is now exposed for all its worth.
  • Your iclicker is now exposed for all its worth.

  • The back panel can be set aisde, as the remaining components are housed in the front panel.

Yorum Ekle

Using a spudger, gently pry the battery connectors from the front panel. Using a spudger, gently pry the battery connectors from the front panel.
  • Using a spudger, gently pry the battery connectors from the front panel.

Yorum Ekle

If your circuit board is stuck in the front panel, use a spudger to lift the circuit board from the front panel.
  • If your circuit board is stuck in the front panel, use a spudger to lift the circuit board from the front panel.

Yorum Ekle

The buttons can be easily removed from the front assembly sans spudger.
  • The buttons can be easily removed from the front assembly sans spudger.

Yorum Ekle

Don't lose the small LED cover sitting precariously in the front panel.
  • Don't lose the small LED cover sitting precariously in the front panel.

Yorum Ekle

Your iclicker is now disassembled.
  • Your iclicker is now disassembled.

Yorum Ekle

Bir Yorum

What is an iClicker ?

furbies - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 14

Her zaman: 6,522