Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

This short guide will give step by step instructions on the removal of the bottom panel of the Inspiron 7359 2-in-1. This disassembly requires the use of a Phillips #0 screwdriver, and a spudger.

  1. Turn off device  before starting.
    • Turn off device before starting.

    • Turn the laptop upside down with the logo facing the surface of the table.

  2. Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop. Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.
    • Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.

  3. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  4. Use a spudger to separate the back cover from the laptop.
    • Use a spudger to separate the back cover from the laptop.

    • Start from one corner and work your way around the edge of the cover.

    • Be careful not to bend or crack the back cover.

  5. All hardware components should be exposed.
    • All hardware components should be exposed.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

meetkumar desai

Üyelik tarihi: 08-10-2017

330 İtibar

2 adet Kılavuz yazıldı

Takım

Gateway, Team S1-G3, Saknee Fall 2019 Gateway, Team S1-G3, Saknee Fall 2019 üyesi

GCC-SAKNEE-F19S1G3

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 82