Eşyalarını Tamir Et Topluluk Mağaza

Dismantle Nespresso CitiZ

Giriş

For many repairs the CitiZ must be opened, this is shown here.

Neye ihtiyacın var

  1. Dismantle Nespresso CitiZ, Dismantle Nespresso CitiZ: adım 1, 1 resimden 1.

    • Never forget: pull the plug!

    • Remove all attachments: Water tank, capsule and cup drawer, drip tray.

    • The model shown is also equipped with a milk frother, remove that too.

    Çevir

  2. Dismantle Nespresso CitiZ: adım 2, 2 resimden 1. Dismantle Nespresso CitiZ: adım 2, 2 resimden 2.
    Bu adımda kullanılan alet:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    Satın Al

    • The bottom is secured by oval head screws.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Nespresso wants to keep us out of our own machines!!!

    • Remove five oval head screws securing the large bottom panel.

    • Note: this panel is smaller on models without milk frother.

    Çevir

  3. Dismantle Nespresso CitiZ: adım 3, 3 resimden 1. Dismantle Nespresso CitiZ: adım 3, 3 resimden 2. Dismantle Nespresso CitiZ: adım 3, 3 resimden 3.

    • The bottom panel is just snapped into place. Insert a metal spudger into the slots and lift the panel out. It sits quite tightly and you might use some force to get it out.

    Çevir

  5. Dismantle Nespresso CitiZ: adım 4, 1 resimden 1.

    • Remove the large bottom panel.

    Çevir

  6. Dismantle Nespresso CitiZ: adım 5, 1 resimden 1.

    • Use a spudger to slide off the two silicon tubes.

    Çevir

  7. Dismantle Nespresso CitiZ: adım 6, 2 resimden 1. Dismantle Nespresso CitiZ: adım 6, 2 resimden 2.

    • Disconnect the two spade plugs on the blue and brown wires from the power switch. The two left ones remain.

    Çevir

  8. Dismantle Nespresso CitiZ: adım 7, 1 resimden 1.

    • Remove four oval head screws from the small bottom panel.

    • Remove the main device from the base. It´s still connected with some wires, but this doesn´t bother much.

    Çevir

  9. Dismantle Nespresso CitiZ: adım 8, 3 resimden 1. Dismantle Nespresso CitiZ: adım 8, 3 resimden 2. Dismantle Nespresso CitiZ: adım 8, 3 resimden 3.

    • The two colored side panels are only snapped into place. However, the latches sit very tight. You really need a lot of force. First lift the lower edge using a plastic opening tool.

    • Depending from the model it might help, when you first pry off the coffee spout. (See next step)

    • Unfold each of the side panels upwards and remove them.

    Çevir

  10. Dismantle Nespresso CitiZ: adım 9, 1 resimden 1.

    • Insert a opening tool in the gap on the bottom of the coffee spout. Pry it off carefully.

    Çevir
Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Bu çevirmenlere özel teşekkürler:

de en

100%

VauWeh

VauWeh dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

Yazar

1 tane daha katılımcı ile

VauWeh

Üyelik tarihi: 10/19/15

203.741 İtibar

246 adet Kılavuz yazıldı

Rozetler: 44

+41 tane daha rozet

Ekip

Repair is War on Entropy Repair is War on Entropy üyesi

Community

25 Üyeler

1.127 adet Kılavuz yazıldı

2 Yorum

Wie geht es weiter um an die Heizung zu kommen? Vermutlich ist eine Reperatur nicht möglich.

Martin Gastberger - Yanıt

Ich denke der Teardown zeigt es: Nespresso CitiZ Teardown

VauWeh -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 14

Son 7 gün: 134

Son 30 gün: 602

Her zaman: 9,764