Ana içeriğe geç

Drill Master Heat Gun Motor Replacement

Neye ihtiyacın var

  1. Drill Master Heat Gun Motor Replacement, Motor: adım 1, 1 resimden 1.
    • Be sure the heat gun is unplugged before starting this process.

    • Remove the seven 14mm screws from the side of the drill using the PH#0 screwdriver.

    • You will need a screwdriver extension.

  2. Drill Master Heat Gun Motor Replacement: adım 2, 1 resimden 1.
    • Remove the 8mm screw from underside of barrel using the PH#0 screwdriver.

    • Don't try to open the casing just yet.

  3. Drill Master Heat Gun Motor Replacement: adım 3, 3 resimden 1. Drill Master Heat Gun Motor Replacement: adım 3, 3 resimden 2. Drill Master Heat Gun Motor Replacement: adım 3, 3 resimden 3.
    • Remove the barrel casing on either end by twisting and pulling each side off.

  4. Drill Master Heat Gun Motor Replacement: adım 4, 1 resimden 1.
    • Remove the top casing to reveal inside of drill. You might have to tug a little harder for this one.

  5. Drill Master Heat Gun Motor Replacement: adım 5, 1 resimden 1.
    • Remove the metal casing and fan cover from the fan unit.

  6. Drill Master Heat Gun Motor Replacement: adım 6, 1 resimden 1.
    • Bend the metal prongs backward that connect the fan motor to the plastic cap.

    • Bending the brackets too far back can cause the brackets to break.

  7. Drill Master Heat Gun Motor Replacement: adım 7, 1 resimden 1.
    • Remove the plastic cap from the motor,

    • This will allow you to work only with the motor and fan.

  8. Drill Master Heat Gun Motor Replacement: adım 8, 1 resimden 1.
    • Remove the fan by pulling it from the motor rod.

  9. Drill Master Heat Gun Motor Replacement: adım 9, 1 resimden 1.
    • Remove the two 12mm screws from the plastic fan casing using PH#00

  10. Drill Master Heat Gun Motor Replacement: adım 10, 1 resimden 1.
    • Remove the plastic fan casing.

  11. Drill Master Heat Gun Motor Replacement: adım 11, 1 resimden 1.
    • Remove the metal casing from the motor and insert the new motor in its place.

    • You may have to tug a little.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Mikayla Kim

Üyelik tarihi: 01/31/17

523 İtibar

5 adet Kılavuz yazıldı

Bir Yorum

Where can I find a new motor?

jstabler38 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 16

Her zaman: 1,437