Ana içeriğe geç

Drobo FS DRDS2-A Power Switch Replacement

Neye ihtiyacın var

  1. Drobo FS DRDS2-A Power Switch Replacement, Case: adım 1, 1 resimden 1.
    • To start getting the case off remove the front panel so it's out of the way.

  2. Drobo FS DRDS2-A Power Switch Replacement: adım 2, 2 resimden 1. Drobo FS DRDS2-A Power Switch Replacement: adım 2, 2 resimden 2.
    • Next remove the screws from the feet of the case with a phillips head screwdriver.

  3. Drobo FS DRDS2-A Power Switch Replacement: adım 3, 1 resimden 1.
    • To remove the case, place the Drobo on its back and slide the case off.

  4. Drobo FS DRDS2-A Power Switch Replacement, Power Switch: adım 4, 3 resimden 1. Drobo FS DRDS2-A Power Switch Replacement, Power Switch: adım 4, 3 resimden 2. Drobo FS DRDS2-A Power Switch Replacement, Power Switch: adım 4, 3 resimden 3.
    • Press tabs to release back cover and lift off

  5. Drobo FS DRDS2-A Power Switch Replacement: adım 5, 2 resimden 1. Drobo FS DRDS2-A Power Switch Replacement: adım 5, 2 resimden 2.
    • Push tabs in and carefully pull out the front facer and drive shelves

  6. Drobo FS DRDS2-A Power Switch Replacement: adım 6, 2 resimden 1. Drobo FS DRDS2-A Power Switch Replacement: adım 6, 2 resimden 2.
    • Unscrew the back face by removing the screw on the back sides, then slide top face apart from the others

    • If you have a Drobo 5N2, you may also need to remove the 3 screws on each side.

  7. Drobo FS DRDS2-A Power Switch Replacement: adım 7, 2 resimden 1. Drobo FS DRDS2-A Power Switch Replacement: adım 7, 2 resimden 2.
    • Carefully unplug the Power Switch and Fan wires.

  8. Drobo FS DRDS2-A Power Switch Replacement: adım 8, 1 resimden 1.
    • Press tabs on Power Switch to release the Power Switch and Push out.

    • A Spudger like object is helpful for pushing in the tabs if the fan is not removed also

  9. Drobo FS DRDS2-A Power Switch Replacement: adım 9, 2 resimden 1. Drobo FS DRDS2-A Power Switch Replacement: adım 9, 2 resimden 2.
    • Finally pull the old switch out and pop the new one in.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Rye Cassan

Üyelik tarihi: 01/24/17

155 İtibar

1 Kılavuz yazıldı

Ekip

Cal Poly, Team 10-4, Banghart Winter 2017 Cal Poly, Team 10-4, Banghart Winter 2017 üyesi

CPSU-BANGHART-W17S10G4

3 Üyeler

5 adet Kılavuz yazıldı

4 Yorum

Hello,

great info I found here, but where do I buy a replacement button for my Drobo in Europe?

Kind regards and thank you in advance,

Heinrich

Heinrich Voelkel - Yanıt

Hi, where do I find a replacement power switch for my Drobo 5N? BTW, thanks for the great tutorial!

Stephen R Parrott - Yanıt

I took my Drobo apart and the printed numbers on the switch are R13-112. I ordered these on Amazon:

https://www.amazon.com/Twidec-Rocker-Tog...

I put it in, crossed my fingers, and BAM, worked like a charm. Hope that helps all the future DIY’ers.

tdubs - Yanıt

Good article - thanks. Discovered my Drobo 5N (cir 2014) has a 3-wire spring-loaded switch with 2V LED (green) (wires: Red - White - Blue) Press once to turn on; Press and hold to manually turn off. Can simple R13-112 SPST switch be substituted?

John W - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 30

Her zaman: 2,052