Ana içeriğe geç

Dyson DC28 Animal Wheel Replacement

Neye ihtiyacın var

  1. Dyson DC28 Animal Wheel Replacement, Wheel: adım 1, 1 resimden 1.
    • Flip the vacuum face down with the wheels facing up.

  2. Dyson DC28 Animal Wheel Replacement: adım 2, 1 resimden 1.
    • Start on the right side wheel of the vacuum cleaner

    • Remove the plastic wheel cap by sliding the tip of the metal spudger under the edge of the cap.

    • Gently pry off the plastic cap

  3. Dyson DC28 Animal Wheel Replacement: adım 3, 3 resimden 1. Dyson DC28 Animal Wheel Replacement: adım 3, 3 resimden 2. Dyson DC28 Animal Wheel Replacement: adım 3, 3 resimden 3.
    • Identify the e-clip located under the metal axle.

    • The e-clip is very small and may be hard to identify. It is a small metal ring between the metal axle and the plastic wheel.

    • Use the metal spudger to pry off the e-clip.

    • The e-clip is hard to remove and may require extra force.

  4. Dyson DC28 Animal Wheel Replacement: adım 4, 2 resimden 1. Dyson DC28 Animal Wheel Replacement: adım 4, 2 resimden 2.
    • Slide off the plastic wheel off of the metal axle

    • Be careful when removing plastic wheel. There is a loose metal washer and black axle piston behind the wheel that can easily fall off.

    • Slide off the metal washer and black axle piston from the metal axle

  5. Dyson DC28 Animal Wheel Replacement: adım 5, 1 resimden 1.
    • Remove the metal axle by pulling on the left wheel. This does not take a lot of force and should easily slide out.

    • Repeat steps 2, 3, and 4 to remove the left side wheel from the metal axle.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Zachary Urciuoli

Üyelik tarihi: 01/27/17

101 İtibar

1 Kılavuz yazıldı

Ekip

Cal Poly, Team 21-4, Maness Winter 2017 Cal Poly, Team 21-4, Maness Winter 2017 üyesi

CPSU-MANESS-W17S21G4

5 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 11

Her zaman: 2,987