Ana içeriğe geç

Dyson DC56 Attachments Replacement

Neye ihtiyacın var

  1. Dyson DC56 Attachments Replacement, Dust Bin: adım 1, 1 resimden 1.
    • Make sure the vacuum is unplugged.

    • Warning: Avoid pressing the red trigger because it will turn on and begin suction.

  2. Dyson DC56 Attachments Replacement: adım 2, 1 resimden 1.
    • Locate the purple button at the top of the device.

  3. Dyson DC56 Attachments Replacement: adım 3, 1 resimden 1.
    • Separate the device with the purple button.

  4. Dyson DC56 Attachments Replacement: adım 4, 1 resimden 1.
    • Locate the dust bin's red release lever on the side of the device.

    • Make sure if the dust bin is full you open the vacuum over a trash can.

  5. Dyson DC56 Attachments Replacement: adım 5, 1 resimden 1.
    • Push the red lever to release the dust bin lid.

  6. Dyson DC56 Attachments Replacement: adım 6, 1 resimden 1.
    • Locate the red lever below the vacuum.

  7. Dyson DC56 Attachments Replacement: adım 7, 1 resimden 1.
    • Push the red lever, pull the back up and away from the dust bin to separate them.

  8. Dyson DC56 Attachments Replacement, Attachments: adım 8, 1 resimden 1.
    • Locate two screws at the back of the attachment holder.

  9. Dyson DC56 Attachments Replacement: adım 9, 1 resimden 1.
    • Use a T8-Torque screwdriver to take out the two 26mm screws out.

  10. Dyson DC56 Attachments Replacement: adım 10, 1 resimden 1.
    • Loosen the attachment holder by using a metal spudger.

  11. Dyson DC56 Attachments Replacement: adım 11, 1 resimden 1.
    • Remove the attachment holder.

Sonuç

To reassemble your device, follow these instructions in reverse order.

John Czerkawski

Üyelik tarihi: 10/02/17

427 İtibar

4 adet Kılavuz yazıldı

Ekip

USF Tampa, Team S10-G1, Thompson Fall 2017 USF Tampa, Team S10-G1, Thompson Fall 2017 üyesi

USFT-THOMPSON-F17S10G1

4 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 758