Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

Check out this guide to learn how to remove the battery pack from the Dyson DC58 vacuum. If your vacuum is not charging due to a damaged or dead battery this guide will show you how to replace it!

  1. Make sure your vacuum is unplugged.
    • Make sure your vacuum is unplugged.

    • Avoid pressing the red trigger on the vacuum handle; this will power on the vacuum.

  2. Locate the red lever parallel to the red trigger and on the side of the clear bin.
    • Locate the red lever parallel to the red trigger and on the side of the clear bin.

  3. Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.
    • Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.

  4. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  5. Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum. Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.
    • Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.

  6. Locate the 10mm screw on the side of the battery pack closest to the purple cyclone of the vacuum Use the 2.0 Phillips head screwdriver to remove the 10mm screw
    • Locate the 10mm screw on the side of the battery pack closest to the purple cyclone of the vacuum

    • Use the 2.0 Phillips head screwdriver to remove the 10mm screw

  7. Locate the  10mm screw on the back of the handle on the opposite side of the red trigger button Use the 2.0 philips head screwdriver to remove the 10mm screw
    • Locate the 10mm screw on the back of the handle on the opposite side of the red trigger button

    • Use the 2.0 philips head screwdriver to remove the 10mm screw

  8. Pull the base of the vacuum down, away from the main body Pull the base of the vacuum down, away from the main body Pull the base of the vacuum down, away from the main body
    • Pull the base of the vacuum down, away from the main body

Sonuç

To reassemble your device, follow these instructions in reverse order.

36 farklı kişi bu kılavuzu tamamladı.

Krista St Onge

Üyelik tarihi: 17-09-2015

1.582 İtibar

2 adet Kılavuz yazıldı

Takım

CSU Fullerton, Team 2-4, Bruce Fall 2015 CSU Fullerton, Team 2-4, Bruce Fall 2015 üyesi

CSUF-BRUCE-F15S2G4

4 Üyeler

12 adet Kılavuz yazıldı

15 Yorum

I paid just £30 for a black & decker dust buster 10yrs ago & you tell me you want £60 for a replacement battery pack after 3yrs. Dyson has to do better. Your records don’t show that you agreed to replace the pack while the product was under gaurantee so this battery isn’t even 2yrs old!

lucialucia21 - Yanıt

Great illustration.

apple - Yanıt

mine isn;’t even a year old

M Donahue - Yanıt

Vacuum Cleaner Battery for DYSON DC58

Type: Li-ion

Volt: 21.6V

Capacity: 2000mAh

The more detail at http://www.drill-battery.com.au/buy.php/...

drillbatterycomau - Yanıt

Yup we have three stain animals in our house two are just over one year old and the other is a little over two years. None of them hold a charge anymore

swelch19673 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 95

Son 7 gün: 767

Son 30 gün: 2,916

Her zaman: 101,792