Skip to main content

Giriş

This guide will show you how to open and replace the bin of your Dyson DC58.

  1. Make sure your vacuum is unplugged.
    • Make sure your vacuum is unplugged.

    • Avoid pressing the red trigger on the vacuum handle; this will power on the vacuum.

  2. Locate the red lever parallel to the red trigger and on the side of the clear bin.
    • Locate the red lever parallel to the red trigger and on the side of the clear bin.

  3. Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın
  4. Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.
    • Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.

  5. Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum. Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.
    • Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Ian Sloan

Üyelik tarihi: 17-09-2015

146 Reputation

1 Kılavuz yazıldı

Team

CSU Fullerton, Team 2-4, Bruce Fall 2015 CSU Fullerton, Team 2-4, Bruce Fall 2015 üyesi

CSUF-BRUCE-F15S2G4

4 Üyeler

12 adet Kılavuz yazıldı

2 Comments

The bin is stuck and won’t come off, although I have followed the directions above.

Marcy Altimano - Yanıt

I think the reassembly instructions should be numbered “Step 5” and printed right below Step 4. They aren’t that easy to see.

Mary Miraglia - Yanıt

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 43

Past 30 Days: 166

All Time: 4,884