Dyson Supersonic HD01 Filter Cover Replacement

Giriş

If you've found yourself in a situation where the plastic air filter cover of your Dyson Supersonic HD01 has been damaged due to a drop or impact, fear not! This guide is here to help you replace the cover and get your hairdryer back in working order.

Neye ihtiyacın var

Adım 1 Unlock the filter cover

Dyson Supersonic HD01 Filter Cover Replacement, Unlock the filter cover: adım 1, 2 resimden 1.

Dyson Supersonic HD01 Filter Cover Replacement, Unlock the filter cover: adım 1, 2 resimden 2.

Find the red dot along the top of the filter cover.
The red dot will be aligned with the white dot at the bottom of the hair dryer's handle.
Twist the filter cover counter-clockwise until the red dot is shifted to align with the white empty circle on the dryer handle.

Düzenle

Adım 2 Remove the filter cover

Dyson Supersonic HD01 Filter Cover Replacement, Remove the filter cover: adım 2, 2 resimden 1.

Dyson Supersonic HD01 Filter Cover Replacement, Remove the filter cover: adım 2, 2 resimden 2.

Remove the filter cover by sliding it off of the body of the hairdryer.
Use a saw or sidecutters to destructively remove the broken filter cover from the cable while taking care to not damage the insulation of the power cable.
The replacement part will have a slot on the side that makes it possible to install it by sliding onto the cable.