Ana içeriğe geç

EVGA x17 Clicker Replacement

Neye ihtiyacın var

  1. EVGA x17 Clicker Replacement, Clicker: adım 1, 1 resimden 1.
    • Remove the mouse skates to reveal 5 screws.

  2. EVGA x17 Clicker Replacement: adım 2, 1 resimden 1.
    • Use a Phillips head screwdriver to remove the 5 screws that secure the bottom panel.

  3. EVGA x17 Clicker Replacement: adım 3, 1 resimden 1.
    • Remove the weight chamber cover.

  4. EVGA x17 Clicker Replacement: adım 4, 1 resimden 1.
    • Slowly slide a spudger into and around the bottom of the panel, prying until a "popping" sound is heard.

  5. EVGA x17 Clicker Replacement: adım 5, 2 resimden 1. EVGA x17 Clicker Replacement: adım 5, 2 resimden 2.
    • Remove the 13 screws on the interior.

    • There are 2 Phillips truss-head tapping screws, large circular heads, and the 11 Phillips screws from the interior.

  6. EVGA x17 Clicker Replacement: adım 6, 1 resimden 1.
    • Carefully slide the middle section out.

  7. EVGA x17 Clicker Replacement: adım 7, 1 resimden 1.
    • Remove the two screws from each clicker.

  8. EVGA x17 Clicker Replacement: adım 8, 1 resimden 1.
    • Pop and slide out each clicker that needs to be replaced.

    • Clickers may need to be tugged forward in their slots to slide out.

    • Be extra careful removing clickers because the attachments are fragile.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sydney Puett

Üyelik tarihi: 09/13/23

569 İtibar

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 10

Her zaman: 98