Eşyalarını Tamir Et Topluluk Mağaza

Eco X Gear Gasket Replacement

Giriş

You will need a phillips head screw driver and needle nose pliers to complete this task. Before opening the device, ensure that there is no power to avoid damaging the electronics or harming yourself.

Neye ihtiyacın var

  1. Eco X Gear Gasket Replacement, Frame: adım 1, 1 resimden 1.

    • Disconnect any power source and/or turn off device.

    Düzenle

  2. Eco X Gear Gasket Replacement: adım 2, 1 resimden 1.

    • Remove the 15 rubber plugs from the cavities using needle nose pliers.

    Düzenle

  4. Eco X Gear Gasket Replacement: adım 3, 1 resimden 1.

    • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

    Düzenle

  5. Eco X Gear Gasket Replacement: adım 4, 1 resimden 1.

    • Carefully separate the two sections of the frame.

    • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

    Düzenle

  6. Eco X Gear Gasket Replacement, Gasket: adım 5, 1 resimden 1.

    • Inspect the gasket around the perimeter of the frame. Remove the gasket using your fingers or needle nose pliers.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

James Lipsett

Üyelik tarihi: 03/20/17

625 İtibar

6 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

UMass Dartmouth, Team S9-G3, Martin Spring 2017 UMass Dartmouth, Team S9-G3, Martin Spring 2017 üyesi

UMASSD-MARTIN-S17S9G3

2 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 4

Her zaman: 118