Eşyalarını Tamir Et Topluluk Mağaza

Eco X Gear LED Display Replacement

Giriş

You will need a phillips head screw driver, needle nose pliers, solder, and a soldering iron to complete this task. Before opening the device, ensure that there is no power to avoid damaging the electronics or harming yourself.

Neye ihtiyacın var

  1. Eco X Gear LED Display Replacement, Frame: adım 1, 1 resimden 1.

    • Disconnect any power source and/or turn off device.

    Düzenle

  2. Eco X Gear LED Display Replacement: adım 2, 1 resimden 1.

    • Remove the 15 rubber plugs from the cavities using needle nose pliers.

    Düzenle

  4. Eco X Gear LED Display Replacement: adım 3, 1 resimden 1.

    • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

    Düzenle

  5. Eco X Gear LED Display Replacement: adım 4, 1 resimden 1.

    • Carefully separate the two sections of the frame.

    • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

    Düzenle

  6. Eco X Gear LED Display Replacement, LED Display: adım 5, 1 resimden 1.

    • Locate the terminals coming off of the backside of the LED lights. Cut the terminals to remove the light from the frame.

    Düzenle

  7. Eco X Gear LED Display Replacement: adım 6, 1 resimden 1.

    • Insert the new LED light into the frame. Use the solder and soldering iron to reconnect the terminals to the new lights.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

James Lipsett

Üyelik tarihi: 03/20/17

625 İtibar

6 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

UMass Dartmouth, Team S9-G3, Martin Spring 2017 UMass Dartmouth, Team S9-G3, Martin Spring 2017 üyesi

UMASSD-MARTIN-S17S9G3

2 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 4

Her zaman: 131