Eco X Gear Voice Coil Replacement - iFixit Tamir Kılavuzu

Giriş

You will need a phillips head screw driver and needle nose pliers to complete this task. Before opening the device, ensure that there is no power to avoid damaging the electronics or harming yourself.

Neye ihtiyacın var

Adım 1 Frame

Eco X Gear Voice Coil Replacement, Frame: adım 1, 1 resimden 1.

Disconnect any power source and/or turn off device.

Adım 2

Eco X Gear Voice Coil Replacement: adım 2, 1 resimden 1.

Remove the 15 rubber plugs from the cavities using needle nose pliers.

Adım 3

Eco X Gear Voice Coil Replacement: adım 3, 1 resimden 1.

Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

Adım 4

Eco X Gear Voice Coil Replacement: adım 4, 1 resimden 1.

Carefully separate the two sections of the frame.
Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

Adım 5 Voice Coil

Eco X Gear Voice Coil Replacement, Voice Coil: adım 5, 1 resimden 1.

Disconnect the wiring to improve accessibility to the cones.

Adım 6

Eco X Gear Voice Coil Replacement: adım 6, 2 resimden 1.

Eco X Gear Voice Coil Replacement: adım 6, 2 resimden 2.

Remove the four screws that hold down the speaker and pry up the speaker from the frame.

Adım 7

Eco X Gear Voice Coil Replacement: adım 7, 1 resimden 1.

Once the voice coil is removed, solder it back onto the bracket or replace the voice coil entirely.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

James Lipsett

Üyelik tarihi: 03/20/17

625 İtibar

6 adet Kılavuz yazıldı

+7 tane daha rozet

Ekip

UMass Dartmouth, Team S9-G3, Martin Spring 2017 UMass Dartmouth, Team S9-G3, Martin Spring 2017 üyesi

UMASSD-MARTIN-S17S9G3

2 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 172