Giriş
In order to repair any of the internal components of the Ecovacs Deebot 900, the bottom cover must be removed. This will be a required step for repairing anything inside of the robot and must be completed first, so use this guide to open the Ecovacs 900 Deebot.
Neye ihtiyacın var
-
-
-
Using a Phillips #00 screwdriver, remove the eight screws on the bottom edge of the bumper.
-
-
-
Using a Phillips #00 screwdriver, take out the six screws around the perimeter of the bottom case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.