Ana içeriğe geç

Giriş

Use this guide to replace the batteries on a Drive Electric Wheelchair.

  1. Locate the two batteries under the back of the wheelchair. Pull the first battery pack to where you can reach the red battery connector. Be careful, the batteries are heavy.
    • Locate the two batteries under the back of the wheelchair.

    • Pull the first battery pack to where you can reach the red battery connector.

    • Be careful, the batteries are heavy.

  2. Disconnect the red battery connectors by pulling them apart. Disconnect the red battery connectors by pulling them apart.
    • Disconnect the red battery connectors by pulling them apart.

  3. Remove the first and second battery from the wheelchair. Remove the first and second battery from the wheelchair.
    • Remove the first and second battery from the wheelchair.

  4. Android Tamir Setleri

    A new screen or battery is one kit away.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    A new screen or battery is one kit away.

    Hemen Alışveriş Yapın
  5. Disconnect the black battery connectors by pulling them apart. Disconnect the black battery connectors by pulling them apart.
    • Disconnect the black battery connectors by pulling them apart.

  6. One at a time, disconnect the clips holding each battery case closed. Open each case to reveal the battery inside. Open each case to reveal the battery inside.
    • One at a time, disconnect the clips holding each battery case closed.

    • Open each case to reveal the battery inside.

  7. Remove the old battery from each case. Put one new battery into each plastic case the old batteries were removed from. Put one new battery into each plastic case the old batteries were removed from.
    • Remove the old battery from each case.

    • Put one new battery into each plastic case the old batteries were removed from.

  8. Reattach the clips on each of the battery's protective casings.
    • Reattach the clips on each of the battery's protective casings.

  9. Place the first battery back into the holder under the wheelchair. Make sure that it is pushed all the way to the front of the wheelchair. Place the second battery back into the holder.
    • Place the first battery back into the holder under the wheelchair.

    • Make sure that it is pushed all the way to the front of the wheelchair.

    • Place the second battery back into the holder.

  10. Reconnect the black battery connectors. Do not connect the red connectors until the black are connected. Reconnect the red battery connectors.
    • Reconnect the black battery connectors.

    • Do not connect the red connectors until the black are connected.

    • Reconnect the red battery connectors.

    • Check that the chair turns on and is fully charged.

Bitiş Çizgisi

2 farklı kişi bu kılavuzu tamamladı.

Paige Efting

Üyelik tarihi: 19-01-2016

144 İtibar

1 Kılavuz yazıldı

Takım

Bir Yorum

I greatly enjoyed reading your article :) Please continue publishing helpful topics like this. Regards, from <a href="http://www.scootersnchairs.com">Scooters 'N Chairs</a>.

Justin Lubomirsky - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 23

Son 30 Gün: 82

Her zaman: 2,529