Eşyalarını Tamir Et Topluluk Mağaza

Ematic Genesis 2 Charging Port Replacement

Giriş

This repair guide will teach you how to replace the charging port in the Ematic Genesis 2 tablet.

Neye ihtiyacın var

  1. Ematic Genesis 2 Charging Port Replacement, Charging Port: adım 1, 2 resimden 1. Ematic Genesis 2 Charging Port Replacement, Charging Port: adım 1, 2 resimden 2.

    • With your fingers, carefully pry off the back plastic casing. Starting at the corners is usually the easiest.

    Düzenle

  2. Ematic Genesis 2 Charging Port Replacement: adım 2, 3 resimden 1. Ematic Genesis 2 Charging Port Replacement: adım 2, 3 resimden 2. Ematic Genesis 2 Charging Port Replacement: adım 2, 3 resimden 3.

    • Remove all four screws surrounding the battery with the Phillips head screwdriver.

    • Carefully remove the battery from the device using the Metal Spudger tool to gently separate the battery by wedging it between the device and the battery.

    Düzenle

  4. Ematic Genesis 2 Charging Port Replacement: adım 3, 2 resimden 1. Ematic Genesis 2 Charging Port Replacement: adım 3, 2 resimden 2.

    • Remove both screws on either side of the audio jack using the Philips head screwdriver.

    • Detach audio jack from device.

    Düzenle

  5. Ematic Genesis 2 Charging Port Replacement: adım 4, 2 resimden 1. Ematic Genesis 2 Charging Port Replacement: adım 4, 2 resimden 2.

    • Remove the 3 screws surrounding the circuit board using the Philips head screwdriver.

    • Carefully disconnect the circuit board from the device by detaching the copper flexible PCB ribbon cable.

    Düzenle

  6. Ematic Genesis 2 Charging Port Replacement: adım 5, 2 resimden 1. Ematic Genesis 2 Charging Port Replacement: adım 5, 2 resimden 2.

    • Use a soldering iron to heat the solder holding the charging port to the circuit board.

    • Remove the charging port from board using tweezers.

    Düzenle

  7. Ematic Genesis 2 Charging Port Replacement: adım 6, 1 resimden 1.

    • Solder replacement port into place.

    • Make sure all connections match original.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 2

Her zaman: 543