Giriş

A guide on how to solder --> How To Solder and Desolder Connections

Parçalar

Hiçbir parçaya gerek yok.

Use a spudger to pry open the case of your device to reveal the inside.
  • Use a spudger to pry open the case of your device to reveal the inside.

Yorum Ekle

Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.
  • Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.

Yorum Ekle

  • Remove the screws holding down the motherboard. Remove the plastic power and volume buttons. remove the two side grips of the device. You can now remove the motherboard, speaker, and battery as one from the device.

Yorum Ekle

  • Unsolder the gray, black, and red wires from the motherboard to release the battery.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Timothy

Üyelik tarihi: 21-01-2015

505 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team 9-2, Brown Winter 2015 USF Tampa, Team 9-2, Brown Winter 2015 üyesi

USFT-BROWN-W15S9G2

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 98