Parçalar

Hiçbir parçaya gerek yok.

  1. Use a spudger to pry open the case of your device to reveal the inside.
    • Use a spudger to pry open the case of your device to reveal the inside.

    Yorum Ekle

  2. Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.
    • Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.

    Yorum Ekle

    • The plastic power button is not held in by anything and should just fall right out of your device. You can now take your new plastic power button and fit it into your device. Press the button and make sure you feel it clicking correctly.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Timothy

Üyelik tarihi: 21-01-2015

505 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team 9-2, Brown Winter 2015 USF Tampa, Team 9-2, Brown Winter 2015 üyesi

USFT-BROWN-W15S9G2

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 83