Eşyalarını Tamir Et Topluluk Mağaza

Ematic Model FTABMP2 Screen Replacement

Giriş

If your Ematic Model FTABMP2 has a cracked or damaged screen, refer to this guide to learn how to replace it. The screen on this device is a Full 4.3 LCD Screen Display with Touch Screen Digitizer Glass Panel.

Make sure your device is powered off before you begin.

Neye ihtiyacın var

  1. Ematic Model FTABMP2 Screen Replacement, Screen: adım 1, 2 resimden 1. Ematic Model FTABMP2 Screen Replacement, Screen: adım 1, 2 resimden 2.

    • Gently insert the blue spudger in between the two sections of the tablet and go around breaking the glue seal.

    • Gently take off the back side of the tablet.

    Düzenle

  3. Ematic Model FTABMP2 Screen Replacement: adım 2, 2 resimden 1. Ematic Model FTABMP2 Screen Replacement: adım 2, 2 resimden 2.

    • Locate the light grey clamp on the motherboard and gently use two index fingers to disconnect the black LCD cable from the motherboard.

    Düzenle

  4. Ematic Model FTABMP2 Screen Replacement: adım 3, 1 resimden 1.

    • Gently press on the white clamp using the blue spudger to remove the metal panel.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

5 tane daha katılımcı ile

Timothy

Üyelik tarihi: 01/21/15

505 İtibar

5 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

USF Tampa, Team 9-2, Brown Winter 2015 USF Tampa, Team 9-2, Brown Winter 2015 üyesi

USFT-BROWN-W15S9G2

5 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 198