Ana içeriğe geç

Envizen V100M Speakers Replacement

Neye ihtiyacın var

  1. Envizen V100M Speakers Replacement, Back Cover: adım 1, 2 resimden 1. Envizen V100M Speakers Replacement, Back Cover: adım 1, 2 resimden 2.
    • Remove the two screws on the side of the tablet that hold the back cover in place using the ifixit PH00 screwdriver.

    • The two screws for the back cover are: 1.5mm diameter x 3.5mm long

  2. Envizen V100M Speakers Replacement: adım 2, 3 resimden 1. Envizen V100M Speakers Replacement: adım 2, 3 resimden 2. Envizen V100M Speakers Replacement: adım 2, 3 resimden 3.
    • Pry along the edge of the device to separate the back cover from the device.

    • The speakers are attached to the back cover and motherboard assembly so remove carefully.

  3. Envizen V100M Speakers Replacement, Speakers: adım 3, 1 resimden 1.
    • Check to see if the wires of the speakers are connected to the motherboard assembly here.

  4. Envizen V100M Speakers Replacement: adım 4, 1 resimden 1.
    • take the wires of one of the speakers and solder them back on the mother board, as shown. Remember, Red is always positive (+) and Black is always negative (-). here is a guide on how to solder.

  5. Envizen V100M Speakers Replacement: adım 5, 1 resimden 1.
    • Repeat the same process for the second speaker. The other set of terminals for the second speaker is directly next to the first set.

Sonuç

To reassemble your device, follow these instructions in reverse order.

nbach

Üyelik tarihi: 03/23/15

663 İtibar

6 adet Kılavuz yazıldı

Ekip

UMass Dartmouth, Team 3-2, Duarte Spring 2015 UMass Dartmouth, Team 3-2, Duarte Spring 2015 üyesi

UMASSD-DUARTE-S15S3G2

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 97