Eşyalarını Tamir Et Topluluk Mağaza

Epson Powerlite S5 Projection Lamp Replacement

Giriş

The Epson Powerlite S5 projection lamp will need replacement after about 3000 hours of use. If you get an orange blinking light or "replace lamp" message, this guide will help in bringing your projector back to life.

Neye ihtiyacın var

  1. Epson Powerlite S5 Projection Lamp Replacement, Projection Lamp: adım 1, 2 resimden 1. Epson Powerlite S5 Projection Lamp Replacement, Projection Lamp: adım 1, 2 resimden 2.

    • Make sure the power is off before beginning.

    • Unplug the projector's power cord from the wall.

    • Allow the projection lamp to cool completely before replacing.

    Düzenle

  2. Epson Powerlite S5 Projection Lamp Replacement: adım 2, 2 resimden 1. Epson Powerlite S5 Projection Lamp Replacement: adım 2, 2 resimden 2.

    • Using a Phillip's head screwdriver, remove the screw from the back.

    Düzenle

  4. Epson Powerlite S5 Projection Lamp Replacement: adım 3, 3 resimden 1. Epson Powerlite S5 Projection Lamp Replacement: adım 3, 3 resimden 2. Epson Powerlite S5 Projection Lamp Replacement: adım 3, 3 resimden 3.

    • Slide the cover back.

    • Lift cover to remove.

    Düzenle

  5. Epson Powerlite S5 Projection Lamp Replacement: adım 4, 3 resimden 1. Epson Powerlite S5 Projection Lamp Replacement: adım 4, 3 resimden 2. Epson Powerlite S5 Projection Lamp Replacement: adım 4, 3 resimden 3.

    • Locate the two screws on either side of the projection lamp.

    • Using a Phillip's head screwdriver, loosen the two screws.

    • The screws only loosen. You don't have to worry about them falling out.

    Düzenle

  6. Epson Powerlite S5 Projection Lamp Replacement: adım 5, 3 resimden 1. Epson Powerlite S5 Projection Lamp Replacement: adım 5, 3 resimden 2. Epson Powerlite S5 Projection Lamp Replacement: adım 5, 3 resimden 3.

    • Grip the two plastic bars on the top of the old projection lamp.

    • Remove the projection lamp by pulling straight up.

    • If there is any lamp breakage, handle the shards carefully to avoid injury.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Greg Brown

Üyelik tarihi: 10/06/16

121 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

University of Memphis, Team 4-2, Baddour Fall 2016 University of Memphis, Team 4-2, Baddour Fall 2016 üyesi

UM-BADDOUR-F16S4G2

3 Üyeler

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 1,219