Epson Stylus NX230 Motherboard Replacement

Yazan: Kimberly Pugel (ve 3 başka katılımcı)

Yorumlar: 0
Favoriler: 0
Tamamlanma: 1

Epson Stylus NX230 Motherboard Replacement

Zorluk

Orta

Adımlar

Gerekli Süre

10 dakika

Giriş

The motherboard connects and supplies power to every part of the printer. If your printer is unresponsive, then a connection may be faulty and you will need to remove the motherboard to assess what is wrong.

Aletler

Bu aletleri satın al

iFixit Opening Tools

$1,99

Satın Al
Phillips #2 Screwdriver

$2,99

Satın Al

Parçalar

Hiçbir parça belirtilmedi.

Adım 1 Motherboard

Check to make sure the printer is unplugged to prevent electric shock.

Check to make sure the printer is unplugged to prevent electric shock.

Düzenle

Adım 2

Align your printer so that the front buttons face to the right.

Remove the 3mm Phillips #2 screw in the hole in the top left corner. This screw attaches the side panel to the printer.

Align your printer so that the front buttons face to the right.
Remove the 3mm Phillips #2 screw in the hole in the top left corner. This screw attaches the side panel to the printer.
Store the screws in a safe place so you can access them later.

Düzenle

Adım 3

Flip and remove the top of the printer up so that you can see the inside.

Flip and remove the top of the printer up so that you can see the inside.
There is a white strip in the top right corner of the printer called the ribbon cable.
Make sure that the ribbon cable does not detach from the printer to prevent damaging the connection.

Düzenle

Adım 4

Align the printer so the front button panel faces to the right.

Remove the 3mm Phillips #2 screw on the side of the printer in the top left corner.

Align the printer so the front button panel faces to the right.
Remove the 3mm Phillips #2 screw on the side of the printer in the top left corner.
Store the screw in a safe place so you can access it later.

Düzenle

Adım 5

Take the right side of the bar of plastic that runs across the top of the inside of the printer and push it towards the left side of the printer.

Take the left side of the bar and push it to the left and then to the right.

Take the right side of the bar of plastic that runs across the top of the inside of the printer and push it towards the left side of the printer.
Take the left side of the bar and push it to the left and then to the right.

Düzenle

Adım 6

Using your hands, detach the side panel from the printer.

Take extra care with the locking mechanisms, which help keep the side panel on the printer.

You may need to use the plastic opening tools to pry apart the locking mechanisms.

Using your hands, detach the side panel from the printer.
Take extra care with the locking mechanisms, which help keep the side panel on the printer.
You may need to use the plastic opening tools to pry apart the locking mechanisms.