Parçalar

Hiçbir parçaya gerek yok.

  1. remove the battery door using either your finger nail or a screwdriver. remove the battery door using either your finger nail or a screwdriver. remove the battery door using either your finger nail or a screwdriver.
    • remove the battery door using either your finger nail or a screwdriver.

  2. Then remove the three screws on the back cover using a philips screwdriver #1. Then remove the three screws on the back cover using a philips screwdriver #1.
    • Then remove the three screws on the back cover using a philips screwdriver #1.

  3. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  4. Remove the black back cover with your hand and be careful not to cut the wires attached on the cover.
    • Remove the black back cover with your hand and be careful not to cut the wires attached on the cover.

  5. Using a screwdriver #1, remove the 2 small screws located at the top and bottom of the alarm switch. Using a screwdriver #1, remove the 2 small screws located at the top and bottom of the alarm switch.
    • Using a screwdriver #1, remove the 2 small screws located at the top and bottom of the alarm switch.

  6. Using soldering iron, detach wire end from the copper cylinder by plaint the end of the iron to the end of the wire. Now you can replace the alarm switch with a new one by attaching one end of the wires to the copper cylinder . Then install the switch screws using the screwdriver. Using soldering iron, detach wire end from the copper cylinder by plaint the end of the iron to the end of the wire. Now you can replace the alarm switch with a new one by attaching one end of the wires to the copper cylinder . Then install the switch screws using the screwdriver.
    • Using soldering iron, detach wire end from the copper cylinder by plaint the end of the iron to the end of the wire. Now you can replace the alarm switch with a new one by attaching one end of the wires to the copper cylinder . Then install the switch screws using the screwdriver.

  7. a photo of the steps we have been through in working on the clock and a photo of the tools we used and the clock parts during disassembly a photo of the steps we have been through in working on the clock and a photo of the tools we used and the clock parts during disassembly
    • a photo of the steps we have been through in working on the clock and a photo of the tools we used and the clock parts during disassembly

Sonuç

To reassemble your device, follow these instructions in reverse order.

Alaa

Üyelik tarihi: 27-10-2014

228 İtibar

2 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 5

Her zaman: 400