Ana içeriğe geç

ExoPC Slate Battery Replacement

Neye ihtiyacın var

  1. ExoPC Slate Battery Replacement, Battery: adım 1, 1 resimden 1.
    • Turn the PC on its back with the screen facing down and pull on the piece of plastic shown in the image. Use your fingernails to prod into the depression where the two plastic covers meet.

  2. ExoPC Slate Battery Replacement: adım 2, 2 resimden 1. ExoPC Slate Battery Replacement: adım 2, 2 resimden 2.
    • Using the 00 Phillips screwdriver remove the two screws in the corners.

    • Using your left hand pull at the exposed section of the PC while simultaneously pushing the right with the thumb of your other hand. This will release the plastic clips allowing back cover to slide off, as shown from the picture

    • When removing the back cover make sure that the ribbon connectors going to the screen are not damaged. Carefully fold over the cover like a book.

  3. ExoPC Slate Battery Replacement: adım 3, 3 resimden 1. ExoPC Slate Battery Replacement: adım 3, 3 resimden 2. ExoPC Slate Battery Replacement: adım 3, 3 resimden 3.
    • Remove the tape covering the metal shield as shown in the image.

    • Remove the 12 screws using the Phillips #00 screwdriver.

    • Dislodge the shield by pulling the prongs away from underneath the battery. The shield should come completely off.

  4. ExoPC Slate Battery Replacement: adım 4, 1 resimden 1.
    • Remove tape from the side of the battery.

    • Disconnect the battery from the motherboard.

    • Gently remove the battery.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Aaron Moore

Üyelik tarihi: 10/30/18

217 İtibar

2 adet Kılavuz yazıldı

Ekip

UMass Dartmouth, Team S2-G1, Peak Fall 2018 UMass Dartmouth, Team S2-G1, Peak Fall 2018 üyesi

UMASSD-PEAK-F18S2G1

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 6

Her zaman: 420