Ana içeriğe geç

FirsTime Wall Clock Movemement Mechanism Replacement

Neye ihtiyacın var

  1. FirsTime Wall Clock Movemement Mechanism  Replacement, Movemement Mechanism: adım 1, 2 resimden 1. FirsTime Wall Clock Movemement Mechanism  Replacement, Movemement Mechanism: adım 1, 2 resimden 2.
    • Using a Phillips #1 screwdriver, remove all four screws on the back of the clock.

  2. FirsTime Wall Clock Movemement Mechanism  Replacement: adım 2, 1 resimden 1.
    • Once screws are removed, simply remove the glass lens covering the display of the clock by lifting it with your hands.

  3. FirsTime Wall Clock Movemement Mechanism  Replacement: adım 3, 2 resimden 1. FirsTime Wall Clock Movemement Mechanism  Replacement: adım 3, 2 resimden 2.
    • Turn the display face up.

    • Use needle nose pliers to pull off the 'second' hand.

  4. FirsTime Wall Clock Movemement Mechanism  Replacement: adım 4, 2 resimden 1. FirsTime Wall Clock Movemement Mechanism  Replacement: adım 4, 2 resimden 2.
    • Use needle nose pliers to remove the 'minute' hand.

    • Then use needle nose pliers to remove the 'hour' hand.

  5. FirsTime Wall Clock Movemement Mechanism  Replacement: adım 5, 1 resimden 1.
    • Once all hands are removed, use a 7/16-inch wrench to unscrew, in counter clockwise direction, the threaded nut in the center of the clock.

    • Removing the threaded nut is what allows the movement mechanism to be removed from the clock.

  6. FirsTime Wall Clock Movemement Mechanism  Replacement: adım 6, 2 resimden 1. FirsTime Wall Clock Movemement Mechanism  Replacement: adım 6, 2 resimden 2.
    • Lift the washer underneath the nut with your fingers.

  7. FirsTime Wall Clock Movemement Mechanism  Replacement: adım 7, 1 resimden 1.
    • Now you may remove the display of the clock from your malfunctioning movement mechanism.

Sonuç

To reassemble your device, follow these instructions in reverse order.

17 farklı kişi bu kılavuzu tamamladı.

5 Yorum

Is there a you tube showing these steps?

Patricia Ander - Yanıt

Thank you! there was one tricky thing—the parts I got in the order did not match what I took off, so I had to reconfigure it a bit per new instructions that came with the parts. But I figured it out! Thank you for this instruction.

Leslie Benitez - Yanıt

Excellent illustrations!!!

KO SAMUEL TAK SHUN - Yanıt

there seem to be 2 projections keeping the back & glass together.

I don't want to break them.

Marcia Kaminski - Yanıt

Where can I buy the exact clock?

Barb - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 11

Son 7 gün: 91

Son 30 gün: 351

Her zaman: 7,679