Fisher Paykel Neopuff Valve System Replacement

Giriş

NOTE: The valves are an integral part of the valve, panel and manifold assembly and are not able to be serviced. Please specify the model number from the parts list (section 4.1.2) when ordering a replacement valve assembly.

Please reference the parts list below for the disassembly diagram.

Please refer to page 7 of the device’s Technical Manual for source information.

Neye ihtiyacın var

Adım 1 Valve System

Fisher Paykel Neopuff Valve System Replacement, Valve System: adım 1, 1 resimden 1.

Remove the back cover, fixed by four screws.

Düzenle

Adım 2

Disconnect the tube from the manometer.

Düzenle

Adım 3

Remove the manometer by unscrewing the two retaining nuts.

Düzenle

Adım 4

Fit the existing manometer into the new valve assembly panel.

Düzenle

Adım 5

Tighten the retaining nuts.

Düzenle

Adım 6

Reconnect the manometer tube.

Düzenle

Adım 7

Refit the front panel to the back cover with the four screws from step 1.

Düzenle

Adım 8

Carry out the valve system performance test described above. It is recommended to record the lot number of the new valve assembly onto the Set-up and Maintenance Checklist.

Düzenle