Eşyalarını Tamir Et Topluluk Mağaza

Fitbit Charge HR Vibration Motor Replacement

Giriş

Has your Fitbit Charge HR stopped vibrating? Perhaps your Fitbit vibration motor has gone bad. This guide is a tear-down of the Fitbit Charge HR demonstrating how to replace the Vibration Motor for the Fitbit Charge HR.

Neye ihtiyacın var

  1. Fitbit Charge HR Vibration Motor Replacement, Vibration Motor: adım 1, 1 resimden 1.

    • Remove the four 2.9 mm screws from the back of the display using a Torx screwdriver.

    • Remove the back cover from the device.

    Düzenle

  2. Fitbit Charge HR Vibration Motor Replacement: adım 2, 3 resimden 1. Fitbit Charge HR Vibration Motor Replacement: adım 2, 3 resimden 2. Fitbit Charge HR Vibration Motor Replacement: adım 2, 3 resimden 3.

    • Remove the two 2.9 mm Torx screws holding the circuit board in place.

    • Carefully pry the board out using an opening tool.

    Düzenle

  4. Fitbit Charge HR Vibration Motor Replacement: adım 3, 1 resimden 1.

    • Remove the motherboard assembly from the device by gently lifting.

    Düzenle

  5. Fitbit Charge HR Vibration Motor Replacement: adım 4, 2 resimden 1. Fitbit Charge HR Vibration Motor Replacement: adım 4, 2 resimden 2.

    • Locate the vibration motor on the motherboard.

    • Desolder the red and black wires connected to the motherboard from the vibration motor.

    • Red wire is located closer to the outside. Black wire is closer to the inside of the motherboard.

    • Replace with new vibration motor.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 12

Her zaman: 393