Eşyalarını Tamir Et Topluluk Mağaza

Fixing a Rusted Measuring Tape

Giriş

Use this guide to fix any rusted measuring tape.

Over time measuring tapes tend to rust. It prevents accurate measurements, which can impact your project. This guide illustrates 7 steps to make any rusted measuring tape work accurately again.

Neye ihtiyacın var

  1. Fixing a Rusted Measuring Tape, Measuring Tape: adım 1, 1 resimden 1.

    • Untighten the 9.5 mm Phillips screw with the Phillips screwdriver.

    • Remove the belt clip.

    Düzenle

  2. Fixing a Rusted Measuring Tape: adım 2, 1 resimden 1.

    • Pull the case length off.

    Düzenle

  4. Fixing a Rusted Measuring Tape: adım 3, 1 resimden 1.

    • Untighten the 15.7 mm Phillips screw with the Phillips screwdriver.

    Düzenle

  5. Fixing a Rusted Measuring Tape: adım 4, 1 resimden 1.

    • Open the case with hands.

    Düzenle

  6. Fixing a Rusted Measuring Tape: adım 5, 1 resimden 1.

    • Spray lubricant solution (WD-40) into the spring as indicated.

    Düzenle

  7. Fixing a Rusted Measuring Tape: adım 6, 1 resimden 1.

    • Pull tape in and out to ensure all the lubricant is applied to the spring.

    • Apply lubricant in increments (be gentle and apply slowly).

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Miles Kim

Üyelik tarihi: 04/25/24

133 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

UC Davis, Team 3-4, Whithaus Spring 2024 UC Davis, Team 3-4, Whithaus Spring 2024 üyesi

UCD-WHITHAUS-S24S3G4

3 Üyeler

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 33

Her zaman: 49