Onarım Topluluğuna Katılın - Hesap Oluşturun

Giriş

Follow this JBL Tune 500bt Speakers Removal Guide to open it

Neye ihtiyacın var

Adım 1 Turn the speaker upside down

Fixing left ear no sound, Turn the speaker upside down: adım 1, 2 resimden 1.

Fixing left ear no sound, Turn the speaker upside down: adım 1, 2 resimden 2.

Turn the speaker upside down

Düzenle

Adım 2 Fix springs height

Fixing left ear no sound, Fix springs height: adım 2, 1 resimden 1.

Find two springs and gently pull them about one or two millimetres (approximately 1/32 to 1/16 inches for those using Imperial measurement).

Düzenle

Adım 3 Some extra cleaning

Fixing left ear no sound, Some extra cleaning: adım 3, 1 resimden 1.

It would be nice, but not necessary, to clean these two connecting pads with isopropyl alcohol for better connectivity.
That's it, you're almost done! Now, do the JBL Tune 500bt Speakers Removal Guide backwards to reasssemble and enjoy! (Putting pads back revealed in the Conclusion)

Düzenle

Sonuç

Ah, to put these pads back on -- push a layer into a small vertical slit on upper half of driver cover, and carefully twist it, like opening a tincan, but backwards ;))

Replace headphone pads

2 farklı kişi bu kılavuzu tamamladı.