Eşyalarını Tamir Et Topluluk Mağaza

Flash and re-install the firmware of TCA Yoke

Giriş

Guide on how to re-install the firmware, if it became corrupted and the TCA Yoke is not powering on.

Neye ihtiyacın var

    • Download and install the driver package from here.

    • TCA Yoke and TCA Quadrant both use the same driver.

    Düzenle

    • Press on the Windows button and type "Firmware Update" into the search.

    Düzenle

    • Unplug your TCA Yoke from USB port if you already have it plugged-in

    Düzenle

  5. Flash and re-install the firmware of TCA Yoke, Press and hold the XBOX button: adım 4, 1 resimden 1.

    • Press and hold the Xbox button.

    • Make sure to set your Yoke into PC mode, using the switch at the back, before proceeding to the next step.

    Düzenle

  6. Flash and re-install the firmware of TCA Yoke, Connect to USB while holding the Xbox button: adım 5, 1 resimden 1.

    • Keep holding the Xbox button and connect the Yoke to USB port.

    • Once connected, wait a few seconds and let go of the button.

    Düzenle

    • Your TCA Yoke should show up in Firmware Updater.

    • Press OK on the Firmware Updater and wait for update to complete.

    Düzenle
Bitiş Çizgisi

Yazar

1 tane daha katılımcı ile

Formica Fusca

Üyelik tarihi: 08/01/24

2.595 İtibar

15 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 7

Son 30 gün: 34

Her zaman: 305