Eşyalarını Tamir Et Topluluk Mağaza

Flash and re-install the firmware

Giriş

Guide on how to re-install the firmware, if it became corrupted and wheel is not powering on.

Neye ihtiyacın var

    • Download and install the drivers from here.

    Düzenle

    • Press on the Windows button and type "Firmware Update" into the search.

    Düzenle

    • Unplug T-GT from USB port.

    • Keep it plugged-in to power.

    Düzenle

  5. Flash and re-install the firmware, Press and Hold L3 + R3: adım 4, 1 resimden 1.

    • Press and Hold L3 + R3 on the right side of the base.

    Düzenle

  6. Flash and re-install the firmware, Connect to USB While holding the buttons: adım 5, 1 resimden 1.

    • Keep holding the L3 + R3 buttons and connect T-GT II to USB port

    • Once connected, wait a few seconds and let go of the buttons.

    • Switch on the left side of the base needs to be set to OTHER before connecting to USB.

    Düzenle

    • Your T-GT II should show up in Firmware Updater.

    • Press OK on the Firmware Updater and wait for update to complete.

    Düzenle
Bitiş Çizgisi

Yazar

2 tane daha katılımcı ile

Formica Fusca

Üyelik tarihi: 08/01/24

2.595 İtibar

15 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 8

Son 30 gün: 31

Her zaman: 405