Ana içeriğe geç

Flip Video Ultra USB Spring Replacement

Neye ihtiyacın var

  1. Flip Video Ultra USB Spring Replacement, USB spring: adım 1, 1 resimden 1.
    • Unlock the battery cover by sliding the switch to the unlock position.

  2. Flip Video Ultra USB Spring Replacement: adım 2, 1 resimden 1.
    • Remove the battery cover by sliding it down the camera.

  3. Flip Video Ultra USB Spring Replacement: adım 3, 1 resimden 1.
    • Remove the batteries

  4. Flip Video Ultra USB Spring Replacement: adım 4, 1 resimden 1.
    • Slide the black upper casing off from the device.

  5. Flip Video Ultra USB Spring Replacement: adım 5, 2 resimden 1. Flip Video Ultra USB Spring Replacement: adım 5, 2 resimden 2.
    • Remove the six 1mm screws from the back and upper casing with the Phillips Head screwdriver.

  6. Flip Video Ultra USB Spring Replacement: adım 6, 1 resimden 1.
    • Remove the top casing from the bottom to reveal the inner circuit board.

  7. Flip Video Ultra USB Spring Replacement: adım 7, 2 resimden 1. Flip Video Ultra USB Spring Replacement: adım 7, 2 resimden 2.
    • When removing the back panel, the rubber buttons will become loose and likely fall off the board. This is normal and can easily placed back on the board once finished.

    • Remove the six 1mm screws with the 1 Phillips head screwdriver.

  8. Flip Video Ultra USB Spring Replacement: adım 8, 1 resimden 1.
    • Gently separate the circuit board from the casing.

  9. Flip Video Ultra USB Spring Replacement: adım 9, 1 resimden 1.
    • Using the Phillips head screwdriver, disconnect spring from the plastic nubs.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nathaniel Ruf

Üyelik tarihi: 10/18/16

514 İtibar

5 adet Kılavuz yazıldı

Ekip

UMass Dartmouth, Team 5-7, Martin Fall 2016 UMass Dartmouth, Team 5-7, Martin Fall 2016 üyesi

UMASSD-MARTIN-F16S5G7

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 128