Eşyalarını Tamir Et Topluluk Mağaza

FlySky FS-TH9X Antenna Wire Disconnected

Giriş

The antenna wire could have come out and disconnected from the motherboard. Carefully connect the socket on the motherboard to the connector on the wire.

Neye ihtiyacın var

  1. FlySky FS-TH9X Antenna Wire Disconnected, FlySky FS-TH9X Antenna Wire Disconnected: adım 1, 1 resimden 1.

    • On the back of the remote, locate the antenna box labeled in red.

    Düzenle

  2. FlySky FS-TH9X Antenna Wire Disconnected: adım 2, 1 resimden 1.

    • Unplug the wire that connects the antenna box to the controller.

    Düzenle

  3. FlySky FS-TH9X Antenna Wire Disconnected: adım 3, 1 resimden 1.

    • On either side of the box, squeeze the clips and pull up to release the antenna box away from its socket.

    Düzenle

  5. FlySky FS-TH9X Antenna Wire Disconnected: adım 4, 1 resimden 1.

    • Unscrew the two 2.5 mm Phillips #1 screws with a screwdriver and carefully remove the front plate.

    Düzenle

  6. FlySky FS-TH9X Antenna Wire Disconnected: adım 5, 1 resimden 1.

    • Once you remove it, you will see a wire that is connected to the antenna, and a motherboard.

    Düzenle

  7. FlySky FS-TH9X Antenna Wire Disconnected: adım 6, 1 resimden 1.

    • Locate the brass colored socket and the end of the wire and carefully connect them together.

    • It should click together.

    Düzenle

  8. FlySky FS-TH9X Antenna Wire Disconnected: adım 7, 1 resimden 1.

    • Once connected assemble the box back together.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 90