Eşyalarını Tamir Et Topluluk Mağaza

Force Reboot PowerBook 180

Neye ihtiyacın var

  1. Force Reboot PowerBook 180, Force Reboot PowerBook 180: adım 1, 1 resimden 1.

    • To fully restart the power management unit be sure to remove the AC adapter and the battery first and let the PowerBook sit without power for several minutes.

    • Go to back of computer.

    Düzenle

  3. Force Reboot PowerBook 180: adım 2, 1 resimden 1.

    • Have a pen or small enough object and push it into small hole closest to power button

    • You should hear the startup chime

    Düzenle

  4. Force Reboot PowerBook 180: adım 3, 1 resimden 1.

    • If the computer still exhibits the same issue, repeat steps 1 and 2 and then follow the step listed below before reinstalling the battery.

    • Using two paper clips, simultaneously press and hold down the reset and interrupt buttons for 5 to 10 seconds.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

David Kehley

Üyelik tarihi: 04/11/13

101 İtibar

1 Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Bir Yorum

I have an old 180 and it turns on but all I get on screen is the icon with question mark. Each time I try to put in a floppy disk it ejects it every time. I’ve tried rebooting, unplugging so I guess I’m down to a target practice now. LOL

Jim Baskin - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 11

Son 30 gün: 21

Her zaman: 1,117